
Austin Small
Founder of Cirkit Designer
Builds the circuit simulator that runs the code in these guides.
Also on the Espressif Developer Portal.
Guides
- Blink an LED with an Arduino
- Blink an LED with an ESP32
- Dim an LED with a Knob on an Arduino
- An RGB LED Colour Wheel on an Arduino
- Turn a Servo with a Knob on an Arduino
- Turn a Servo with a Knob on an ESP32
- Measure Distance with an HC-SR04 on an Arduino
- Measure Distance with an HC-SR04 on an ESP32
- Build a Parking Sensor with an HC-SR04 and an LED
- Read Temperature and Humidity with a DHT11 on an Arduino
- Read a DHT11 on an ESP32
- Build a DHT11 Room Monitor with an OLED Display on an Arduino
- DHT11 vs DHT22: Which Temperature and Humidity Sensor to Use
- Show a Reading on an OLED Display with an Arduino
- Show a Reading on an OLED Display with an ESP32
- Print Text on a 16×2 I2C LCD with an Arduino
- Print Text on a 16×2 I2C LCD with an ESP32
- Show Temperature and Humidity on a 16×2 LCD
- Control a Relay Module with an Arduino
- Control a Relay Module with an ESP32
- Water a Plant Automatically with an Arduino
- Control a DC Motor with an L298N and an Arduino
- Control a DC Motor with an L298N and an ESP32
- Build an Obstacle-Avoiding Robot Car with an Arduino
