Learn
Arduino and ESP32 guides you can run before you build
Pinouts, wiring, code and fixes for the parts in most starter kits. Every guide runs its real circuit in your browser, so you can try it before you wire anything.
8 parts · 1 topic · 25 guides
LED
Blink, fade and dim an LED with a knob: which leg is which, the resistor, PWM, and mixing colours.
Servo
Turn a horn to an angle with a knob: wiring, the Servo library, powering it, and fixes for jitter.
HC-SR04
Measure distance with sound: the echo, the timing, a 5 V echo on a 3.3 V board, and a parking sensor.
DHT11
Read temperature and humidity: wiring, the DHT library, a room monitor with a screen, and the DHT22.
OLED
Draw text and graphics on a 128×64 SSD1306 screen over I²C, with a knob to drive it.
16×2 LCD
Print text on a 16×2 I²C LCD: its address, the backpack, a level converter for the ESP32, and a temperature display.
Relay
Switch a 12 V load with a relay module: its contacts, the H/L jumper, the diode a coil needs, and automatic plant watering.
DC motor
Set a DC motor's speed and direction with an L298N: its pinout and jumpers, how the H-bridge and PWM work, and an obstacle-avoiding car.
Topics
MQTT
Send a board's sensor readings to an MQTT broker and switch its LED from your phone: brokers, topics and wildcards, running live.









